Home > Basic Glue Dispenser >

YS-982M-1 Handheld Manual Glue Dispenser With Foot Pedal

Product Categories

Capacitor Lead Cutting [9]
Radial Lead Cutting Machine [2]
LED Lead Cutting [7]
Radial/Axial Lead Forming Machine [1]
Transistor Cutting [6]
Wire Cut and Strip Machine [4]
Auto Housing Insertion Machine [8]
Taped Components Cutting [4]
Other Components Cutting [3]
Wire Crimping Machine [4]
Capacitor Lead Forming [12]
LED Lead Forming [13]
Tube/Strip Cutting Machine [12]
Transistor Forming [21]
Winding and Bundling [2]
Resistor/Diode Forming [26]
Wire Processing Auxiliary equipment [3]
IC And Jumper Wire Forming [8]
Screwdriver With Feeder [4]
Pneumatic Forming Machine [5]
Robot Glue Dispenser [1]
PCB Separator& PCB lead Cutting Machine [3]
Wire Cut And Strip [27]
Wire Stripping Machine [12]
Wire Twister/ Wire Splicing [1]
Coaxial Cable Stripping [13]
SMD Components Counter [11]
Auto Wire Tin Dip Machine [5]
Auto Soldering Machine [6]
Wire Strip& Crimp [6]
Other Machines [17]
Two-end Crimp [7]
One-end Crimp [6]
Wire Terminal Crimp [11]
Combined Wire Crimping [2]
Soft Tube Cutting [15]
Velcro/Film/Strip Cutting [12]
Hot Knife Cutting [3]
Wind And Bind [14]
Cable Tie Tying [4]
Dual-Platform Screwdriver Robot [8]
One-Platform Screwdriver Robot [5]
Handheld Screw Driving [8]
Z Axis Screw Machine [3]
PCB Depanel [9]
PCB Lead Cutting [5]
Packing Machine [8]
Customized Assembly Machine [7]
Vibration Feeder Bowl [7]
Automobile Cable Procesing [7]
New Energy Cable Procesing [8]
Wire Prefeeder [10]
Wire Taping [3]
Push-Pull Force Tester [3]
Wire Labeling&Marking [3]
Crimp Applicators [9]
RJ45/RJ11 Crimp Machine [3]
Wire Cut Strip And Bend [2]
Wire Twister [20]
Wire Splicing [3]
Pin header cutter [2]
Basic Glue Dispenser [15]
Two-Part Epoxy Dispenser [7]
Customized Screwdriver Machine [5]
LED/Capacitor Taping Machine [1]
Heat Shrink Heating [2]
Hot Melt Glue Dispenser [2]

RKENS TECHNOLOGY CO.,LTD

Contact Now

YS-982M-1 Handheld Manual Glue Dispenser With Foot Pedal

Name: YS982M1 Handheld Manual Glue Dispenser With Foot Pedal
Brand: RKENS
Price: 1 USD

Brand Name : RKENS

Model Number : YS-982M-1

Place of Origin : China

Contact Now

Handheld Manual Glue Dispenser With Foot Pedal

The YS-982M01 is a simple manual analog glue dispenser that applies the liquid material from the syringe barrel with electrically controlled pneumatic pressure. It is very easy to adjust the volume of the material by changing the timer settings, the pneumatic pressure or the gauge of the dispensing tip.
The manual glue dispenser can work for wide range of liquids, including materials like epoxy resin, silicone, lubricants, screw-tightening glue, anti-soldering solvent or tin paste.

Power switch: Turns unit on and off. Illuminated to indicate “ON” position.
Air pressure: Controls and indicates air pressure, regulator/gauge: the dispensing circuit.
Mode switch: Places the dispensing circuit in automatic or manual shot mode.
Timer control: Adjust the shot of auto dispense mode.
Vacuum control: Adjust the intensity of the “suck back” vacuum applied to the dispensing circuit.
Dispensing outlet: Provide a quick connect receptacle for the dispensing air circuit.
Foot switch: Activates the dispensing circuit.
Air-in tube: High-pressure air input, 6 mm tubing
Dispensing control: Four grades for the dispensing cycle time.

YS-982M-1 Handheld Manual Glue Dispenser With Foot Pedal

YS-982M-1 Handheld Manual Glue Dispenser With Foot Pedal Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	RKENS TECHNOLOGY CO.,LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!